Welcome Beijing TongTaiLian Technology co.,Ltd !
Tell:010-81513565

Blowing nitrogen

TTL-DCIII water bath nitrogen blowing concentrator

Model:TTL-DCIII

Range:
● Analysis of pesticide residues: vegetables, fruits, grains, plant tissues, etc. ● Environmental analysis: drinking water, groundwater and contaminated water samples ● Phar

Consultation
  • Pntroduction
  • Features
  • Parameter

The TTL-DCIII water bath nitrogen blowing concentrator developed by Beijing Tongtailian Technology Development Co., Ltd. can provide 36-sample processing. The rapid concentration of the sample is achieved by rapidly, continuously, and controllably blowing nitrogen or air into the surface of the heated sample to accelerate the gas flow rate on the surface of the sample. The analysis time is greatly shortened, and the need for rapid detection is satisfied. The method has the characteristics of fast, accurate, low cost, easy control, and simple operation. 

Characters:
1.Suitable for a variety of sample containers such as test tubes, conical flasks, and centrifuge tubes
2.Constant temperature control water bath heating mode, even and slow heating
3.The sample holder can be rotated, the sample is facing the operator and easy to operate
4.Independent adjustment of the height of each blowing needle
5.The gas flow rate of each blowing needle is independently adjusted or closed
6.Easy to disassemble and clean each blown needle
7.Use a disposable blow needle to avoid cross-contamination
8.Electric control of the gas distribution system
9.Needle valve gas consumption meter controls and displays total gas consumption
10.All parts are laboratory grade, made of stainless steel
11.Teflon coating for corrosion and high temperature resistance

Technical data
1.Sample Treatment: 36holes
2.Sample rack lifting method: Electric lifting: 100±2mm
3.Tube Size(diameter): 10-29mm;
4.Beaker holder (optional): Beaker Size: 30-55mm  18holes
5.Gas needle(optional): Gas needle length: 110mm
6.Gas consumption: 330ml/min/sample 
7.Gas flow rate: 0--15L/min 
8.Heating method: water batch under stable temperature
9.Heating power: 1800W
10.Temperature range: room temp-90℃
11.Display method: Digital Display
12. Temperature control accuracy: ±1°C
13. Size: 540W×520D×835H